What are the processes required to design a winter jacket?

A winter jacket is the most common type of clothing in people's modern life. Because of its lightweight, lively, and full of vigor, it is loved by the majority of men and women. Do you really know what are the processes required to design a winter jacket?

Here is the content list:

• Three-dimensional cutting of the prototype

• Prototype design

• Body modification

Three-dimensional cutting of the prototype

The prototype of the winter jacket is the most basic and simple pattern, which is the basis of the winter jacket. The three-dimensional cutting prototype is the basis of the three-dimensional cutting of the winter jacket. The operation steps are as follows: 

1. Cover the front centerline, bust line, and reference line fabric on the human platform in line with the line of the same name on the human platform, and fix it on the human platform with a pin at the front center and point B.P. 

2. Push the excess amount below the bust line to below the B.P point to form the waist area and fix the waist area with a pin. At the same time, determine the position of the side suture and fix it. 

3. Push the margin above the bust line to the shoulders, cut the neckline to eliminate the pulling force at the neckline, and draw dotted lines on the fabric according to the baseline of the neckline, shoulders, and armholes. 

4. The operation method of the back piece of the winter jacket is the same as that of the front piece.

Prototype design

There are two main methods: 

1. Push method: Push out a certain amount of looseness at the chest width before an operation, and temporarily fix it with a pin. 

2. Placement method: After the three-dimensional cutting of the winter jacket is completed, add a loose amount directly to the side seams.

Body modification

Since the three-dimensional cutting of winter jackets, winter jackets have a relatively large technical difficulty, and it is difficult to ensure accuracy in the cutting positions, for left-right symmetrical clothing, only the right body is often made, while the left body is cut according to the right body. Therefore, the winter jacket is revised It is indispensable; (1) Remove the cloth sample from the platform, place it on the platform, and iron it with iron; (2) Use a proofing ruler to re-line the collar, armhole arc, and side of the winter jacket (3) Check whether the relevant parts are reasonable, and cut the left body of the winter jacket according to the right body of the winter jacket; (4) Connect the left and right body of the winter jacket with a needle and re-fix it on the platform, All relevant parts such as pockets and buttons are cut according to the actual sample and placed in the corresponding parts to check whether the overall shape of the winter jacket is perfect.

A province is a form of processing the remaining part in the production of winter jackets. Due to the unevenness of the human body, the drop ratio of the circumference, the size of the looseness, and the low degree of fitness, it determines the appearance of the fabric in many parts of the human body. In a loose state, the concept of the province is formed by intensively processing these loose quantities. The emergence of the province makes the winter jacket shape from the traditional plane shape to the real three-dimensional shape.

Since the winter jacket was formed, the style evolution can be said to be varied. Different eras, different political and economic environments, different occasions, characters, ages, occupations, etc., have a great influence on the shape of the winter jacket. The winter jacket design and production process are more knowledgeable, if you want to know more, please click on https://www.empirelion.com/.